Get Everything On Amazon !
Showing posts with label Electrical Books. Show all posts
Showing posts with label Electrical Books. Show all posts
Personal Protective Grounding for Electric Power Facilities and Power Lines
File Size : 1.66 MB
Pages: 89
Contents:-
Pages: 89
Contents:-
- 1. Purpose and Scope
1.1 Purpose
1.2 Scope
1.3 Responsibility
1.4 Cancellation
- 2. Definitions and Interpretations
- 3. Determine Need for Personal Protective Grounding
3.1 Uses Permitted
3.1.1 Over 600 Volts (Required)
3.1.2 Less Than 600 Volts (Optional)
3.2 Uses Not Permitted
3.2.1 Lightning
3.2.2 Over 50,000 Amperes Available Fault Current
3.2.3 Nontemporary Installations - 4. Basic Criteria for Safe Grounding Practices
4.1 Electric Shock Hazard
4.2 Protective Grounding Requirements
- 5. Ground Cable Assemblies
5.1 Grounding Cable
5.1.1 Cable Ampacity
5.1.2 Parallel Grounds
5.2 Grounding Cable Jackets
5.3 Grounding Clamps
5.4 Ground Cable Ferrules
- 6. Application of Protective Ground Cables
6.1 Determine Maximum Available Fault Current at Worksite
6.2 Size the Cables
6.2.1 Cable Size
6.2.2 Cable Length
6.3 Inspect Ground Cable Assemblies
6.4 Obtain a Clearance
6.5 Confirm De-Energized Status (arc flash hazard analysis required)
6.5.1 Hot Stick
6.5.2 Noisy Tester
6.5.3 Hot Horn or Noisy Tester
6.5.4 Multiple Range Voltage Detector
6.5.5 Neon-Type Indicator
6.5.6 Direct-Reading Voltmeter
6.6 Clean Connections (arc flash hazard analysis required)
6.6.1 Wire Brushing
6.6.2 Self-Cleaning Clamps
6.7 Grounding Cable Installation
6.7.1 Ground-End Clamps
6.7.2 Circuit-End Clamps (arc flash hazard analysis required)
6.7.3 Multiphase, Worksite Grounding Required
6.7.4 Parallel Grounds
6.7.5 Barricade
6.7.6 Removal
6.8 Arc Flash Hazard Analysis Required
- 7. Power and Pumping Plant Protective Grounding
7.1 Three-Phase Tee Grounding
7.2 Double-Isolation Grounding
- 8. Switchyard and Substation Protective Grounding
8.1 General Considerations for Placement of Protective Grounds
8.2 Power Circuit Breakers and Transformers
8.3 Disconnect Switches and Bus
8.4 Insulated High-Voltage Cable
8.4.1 Cable Terminations
8.4.2 Midsection and Splices
8.4.3 Cable Testing
8.5 Grounding Transformers and Phase Reactors
8.6 Capacitor Banks
8.7 Mobile Equipment
- 9. Power Line Protective Grounding
9.1 Grounding on Metal Transmission Structures
9.2 Grounding on Wood Pole Transmission Structures
9.3 Transmission Line Terminal Ground Switches
9.4 Grounding on Distribution Lines
9.5 Surface Equipment and Vehicle Grounding
9.6 Opening or Splicing Aerial Conductors
9.7 Grounding Insulated Power Cable
- 10. Care, Inspection, and Testing Protective Grounding Equipment
10.1 Care
10.2 Inspection
10.2.1 Ground Cable Assemblies
10.2.2 Live-Line Tools
10.3 Testing
10.3.1 Ground Cable Assemblies
10.3.2 Live-Line Tools
10.4 Records
Phasor Diagrams
This is a which's helpful for engineering students. it can be downloaded in zip format in the direct link given bellow.
Three phase power
This is a book which's helpful for engineering students. it includes a tutorial about three phase power. it can be downloaded in zip format in the direct link given bellow.
Magnetic circuits
This is a book which's helpful for engineering students.it includes a tutorial about magnetic circuits. it can be downloaded in zip format in the direct link given bellow.
Electro-mechanical energy conversion
This is a book which's helpful for engineering students. it can be downloaded in zip format in the direct link given bellow.
Experiments and Observations on the Atomic Theory, and Electrical Phenomena by William Higgins
Name:- "Experiments and Observations on the Atomic Theory, and Electrical Phenomena"
Auther:- William Higgins
Published:- Graisberry and Campbell.
Printed by:-Graisberry and Campbell.
Year of Publishing :1814 AD
Copy is Taken from: Oxford University Libraray
Made to Digital form by : Google Project
Date of Digitization : 12th May 2006.
No of Pages: 180
Format available :- PDF, TXT
Size of file: 5.7MB( for pdf)The book "Experiments and Observations on the Atomic Theory, and Electrical Phenomena" is one of the pioneer book in the Atomic Energy science. which is published in early times of nineteenth century. It gives the basics of attomic theory. and is written by famous scientist William Higgins. As atoms are the basic unit of the Particles. but in recent times many changes happens for the theory. even the basics are the same.
Book is available for download asd also for online reading.
Keywords are :-pyrophorus, binary compound, deflagration, chemical synthesis, molecules, specific heat, oxydation, carbonic acid, potash, sulphurous acid, phlogiston, nitre, nitrous gas, inflammable, charcoal, atomic theory, ultimate particles, muriatic acid, quicksilver, chemical affinity.
Click here to Download this Book.
Electrical Safety Operation & Maintenance
File Size : 2.2 MB
Pages : 225
Contents:-
Pages : 225
Contents:-
- CHAPT 1 INTRODUCTION 1-1 PURPOSE 1-2 SCOPE 1-2.1 Voltage Classification 1-2.2 Need 1-2.3 Familiarity and Requirements 1-2.4 Mishap Prevention 1-2.5 Mishap Causes 1-2.6 Unclear Conditions 1-2.7 Applicability 1-2.8 Work Type 1-2.9 Occupational Safety and Health Administration (OSHA) 1-3 REFERENCES 1-4 CODES, STANDARDS, AND PUBLICATIONS 1-5 VARIANCES FROM NORMAL SAFETY PRACTICES 1-6 WARNINGS AND NOTES 1-7 ELECTRICAL HAZARDS 1-7.1 Electrical Shock Dangers and Effects 1-7.2 Danger from Arcs and Blasts 1-7.3 Workplace Dangers 1-7.4 Health Hazards of Asbestos 1-8 MISHAP RESPONSE 1-9 COMMUNICATIONS
- CHAPT 2 WORKER/CREW RESPONSIBILITIES 2-1 LEVELS OF RESPONSIBILITY 2-2 ELECTRICAL WORKER QUALIFICATIONS 2-3 SAFETY MEETINGS 2-4 WORK SITE SAFETY 2-5 JOB HAZARD ANALYSIS/JOB SAFETY ANALYSIS 2-6 SAFETY COMPLIANCE
- CHAPT 3 PRE-SITE SAFETY MANAGEMENT 3-1 WORK LOCATION SAFETY REQUIREMENTS 3-1.1 Working Near Energized Circuits 3-1.2 Work Location 3-2 PUBLIC SAFETY 3-2.1 Warning Devices 3-2.2 Flagmen 3-2.3 Excavations 3-3 NUMBER OF WORKERS REQUIRED 3-4 VERIFYING SYSTEM AND EQUIPMENT PROVISIONS
- CHAPT 4 PERSONAL PROTECTIVE EQUIPMENT 4-1 INTRODUCTION 4-2 INSPECTION OF APPAREL, TOOLS, AND MATERIALS HANDLING EQUIPMENT 4-3 PERSONAL PROTECTIVE APPAREL 4-3.1 Applicable Documents 4-3.2 General Clothing Considerations 4-4 PERSONAL PROTECTIVE EQUIPMENT FOR ARC FLASH PROTECTION 4-5 AIR FORCE PPE REQUIREMENTS FOR HIGH-VOLTAGE OVERHEAD LINE WORK AT 69 KV (NOMINAL) OR LESS 4-6 CLOTHING PROHIBITIONS 4-7 SKIN PROTECTION 4-8 POLE/TREE CLIMBING AND FALL PROTECTION 4-8.1 Personal Protective Equipment 4-8.2 Climbing Personal Protective Equipment 4-8.3 Fall Protection Personal Protective Equipment
- CHAPT 5 WORK AREA PROTECTIVE EQUIPMENT AND TOOLS 5-1 INTRODUCTION 5-2 RUBBER PROTECTIVE EQUIPMENT 5-3 ELEVATED WORK 5-4 LIVE-LINE (HOT-LINE) TOOLS 5-5 ELECTRICAL TESTING DEVICES 5-5.1 Electrical Testing Device Calibration 5-5.2 Voltage Detectors 5-5.3 Phasing Testers 5-5.4 Line Fault Locators 5-5.5 Insulator Testers 5-5.6 Leakage-Current Monitors 5-5.7 Combustible Gas/Oxygen Detectors
- CHAPT 6 ENERGY CONTROL (LOCKOUT/TAGOUT) 6-1 SAFE CLEARANCE AND LOCKOUT/TAGOUT PROCEDURES 6-2 ENERGY CONTROL (LOCKOUT/TAGOUT) 6-2.1 Low-Voltage Levels (600 Volts and Below) 6-2.2 High-Voltage Levels (>600 Volts to 69,000 Volts) 6-.3 INSPECTIONS AND TRAINING
- CHAPT 7 DEENERGIZED LINE GROUNDING 7-1 TEMPORARY GROUNDING 7-1.1 Testing 7-1.2 Installation Criteria 7-1.3 Temporary Grounding System Components 7-1.4 Equipotential Zone 7-1.5 Ground Connection and Electrodes 7-2 TEMPORARY GROUNDING OF SUBSTATION CURRENT-CARRYING EQUIPMENT COMPONENTS 7-3 AERIAL LIFT TRUCK VEHICLE GROUNDING 7-4 TEMPORARY GROUNDING OF UNDERGROUND LINES 7-5 OPENING OR SPLICING DEENERGIZED CONDUCTORS 7-6 GROUNDING FOR STRINGING AND REMOVING LINES 7-7 TEMPORARY GROUNDING OF AERIAL LINES
- CHAPT 8 ENERGIZED LINE WORK 8-1 WORK ON ENERGIZED CIRCUITS 8-2 ENERGIZED WORK RULES 8-2.1 Permitted Work 8-2.2 Personal Protective Equipment 8-2.3 Statement of Qualifications 8-2.4 Work Methods for Voltage Levels 8-2.5 Pre-Work Procedures 8-2.6 General Job-in-Progress Procedures
- CHAPTR 9 SUBSTATIONS AND SWITCHGEAR 9-1 SUBSTATION WORK 9-1.1 Purpose of Substation 9-1.2 Diagrams and Schematics 9-1.3 Engineering Guidance 9-1.4 System Operation 9-1.5 Abnormal Conditions 9-1.6 Defective Equipment 9-2 SWITCHING 9-2.1 Air Switches 9-2.2 Oil Switches 9-2.3 SF Switches 9-2.4 Oil-Filled Vacuum Switches 9-3 FUSES 9-3.1 Characteristics 9-3.2 Fuse Handling 9-3.3 Operation of Energized Fuses 9-3.4 Open Fuse Holder 9-3.5 Closed-Position Fuse Locking 9-3.6 Bypassing 9-4 ENERGY STORING PROTECTIVE DEVICES 9-4.1 Electrical Charge 9-4.2 Surge Arresters 9-4.3 Choke Coils 9-4.4 Capacitors 9-4.5 Coupling Capacitors 9-5 INSTRUMENT TRANSFORMERS 9-5.1 Potential (Voltage) Transformers (PT) 9-5.2 Current Transformers (CT) 9-6 POWER TRANSFORMERS AND REGULATORS 9-6.1 Transformers (Power and Distribution) 9-6.2 Voltage Regulators 9-7 METALCLAD SWITCHGEAR 9-8 STATIONARY BATTERIES 9-8.1 Basis for Safety Requirements 9-8.2 Protective Equipment 9-8.3 Safety Precautions 9-9 INSULATING OIL HANDLING OPERATIONS
- CHAPT 10 AERIAL LINES 10-1 AERIAL LINE WORK 10-2 POLE HANDLING OPERATIONS 10-2.1 General 10-2.2 Pole Contact Precautions 10-2.3 Receiving Pole Shipment 10-2.4 Ground Handling 10-2.5 Long Term Pole Storage 10-2.6 Temporary Pole Storage 10-2.7 Hauling Poles 10-3 POLE INSTALLATION, REPLACEMENT, AND REMOVAL 10-4 CLIMBING AND WORKING ON POLES 10-4.1 General Rules 10-4.2 Pole Inspection Before Climbing 10-5 POLE CLIMBING EQUIPMENT 10-5.1 General Rules 10-5.2 Wooden Pole Climbing Equipment 10-5.3 Concrete and Steel Pole Climbing 10-6 POLE CLIMBING AND WORK PRECAUTIONS 10-7 CROSSING STRUCTURES 10-8 STRINGING OR REMOVING DEENERGIZED CONDUCTORS AND OVERHEAD GROUND WIRES 10-9 ENERGIZED WORK 10-10 STREET LIGHTING 10-10.1 Voltage Level 10-10.2 Clearance Requirements 10-10.3 Multiple Street Lighting Circuits 10-10.4 Series Street Lighting Circuits 10-10.5 Climbing Space 10-10.6 Time Switches 10-11 WORKING ON OR NEAR POLE-MOUNTED EQUIPMENT 10-11.1 Surge Arresters 10-11.2 Switches and Fuses 10-11.3 Capacitors 10-11.4 Power Transformers and Voltage Regulators 10-12 AERIAL ROPE 10-12.1 Conductivity 10-12.2 Terminology of Rope Use 10-12.3 Knots and Splices 10-12.4 Handline and Rope Line Precautions 10-12.5 Tackle Blocks 10-13 TOOLS 10-14 AERIAL LIFTS AND INSULATED BUCKETS 10-15 TREE TRIMMING AND BRUSH REMOVAL
- CHAPT 11 UNDERGROUND LINES 11-1 UNDERGROUND WORK 11-2 GENERAL PROTECTION REQUIREMENTS 11-3 CABLE PULLING 11-4 BURIED ELECTRICAL CABLES 11-5 DAMAGE TO EXISTING UTILITY LINES 11-6 PREPARING TO WORK UNDERGROUND 11-6.1 General Atmosphere Control Precautions Before Entry 11-6.2 Atmosphere Testing Before Entering Underground Structures 11-6.3 Atmospheric Test Equipment 11-6.4 Stray Electrical Voltage Testing 11-6.5 Pumping a Manhole 11-6.6 Removal of Duct Plugs 11-6.7 Emergency Entrance 11-6.8 Ventilation of Underground Structures 11-7 WORK INSIDE UNDERGROUND STRUCTURES
- CHAPT 12 LOW-VOLTAGE INTERIOR SYSTEMS 12-1 WORKING ON INDOOR EQUIPMENT 12-1.1 Restricted Space 12-1.2 Grounding Systems 12-1.3 Disconnection of Power Sources 12-1.4 Related Building Systems 12-2 LOW-VOLTAGE SYSTEMS 12-2.1 Overview 12-2.2 Battery Room Hazards 12-2.3 Fire Alarm Systems 12-2.4 Solid-State Equipment 12-2.5 Low-Voltage Work Precautions 12-3 ROTATING MACHINERY 12-3.1 Hazards of Rotating Machinery 12-3.2 Motors and Generators CHAPT 13 SHORE-TO-SHIP ELECTRICAL POWER CONNECTIONS 13-1 CONNECT/DISCONNECT RESPONSIBILITIES 13-2 SHIP'S MAIN ELECTRICAL SERVICE COMPONENTS 13-2.1 Shore High-Voltage Distribution System 13-2.2 Pier Substations 13-2.3 Ship-to-Shore Pier Electrical Outlet Assemblies 13-2.4 Ship-to-Shore Power Cables and Connectors 13-3 SHIP'S ELECTRICAL SERVICE COMPONENT RELATIONS 13-4 UNUSUAL SHORE-TO-SHIP SYSTEM HAZARDS 13-4.1 Split Personnel Responsibilities 13-4.2 Portable Power Cable and Outlet Safety Assurance 13-4.3 Electrical Equipment Accessibility and Working Space 13-4.4 Ship's Electrical Power Input Safety 13-4.5 Parallel Operation 13-5 SUPPORTING SHORE-TO-SHIP SAFETY REQUIREMENTS 13-5.1 Specialized Shore-to-Ship System Training 13-5.2 Specific SOPs 13-6 PORTABLE SHORE POWER CABLES AND RECEPTACLES 13-6.1 Low-Voltage Terminations and Protective Circuit Breakers 13-6.2 High-Voltage (4,160 Volt and 15 kV) Terminations and Protective Circuit Breakers 13-7 SHIP CONNECTION PROCEDURES BEFORE SHIP DOCKS 13-8 SHORE-TO-SHIP POWER CABLE RIGGING AFTER SHIP DOCKS 13-9 SHIP'S TRANSFER TO SHORE POWER
- CHAPT 14 ELECTRICAL WORKER RESCUE 14-1 RESCUE TRAINING 14-2 POLE-TOP RESCUE 14-3 RESCUE FROM A MANHOLE 14-3 RESCUE FROM AN AERIAL LIFT (BUCKET TRUCK) 14-5 ELECTRICAL SHOCK
Electrical Machine Actuators
This book is about electrical machine actuators. To download the pdf file click on the direct link given below.
DC Machines
This is a book which's helpful for engineering students. It includes a tutorial about DC Machines. it can be downloaded in zip format in the direct link given bellow.
Induction motors
File Type: ZIP
This is a which's helpful for engineering students. It includes a tutorial about Induction motors. it can be downloaded in zip format in the direct link given bellow.
This is a which's helpful for engineering students. It includes a tutorial about Induction motors. it can be downloaded in zip format in the direct link given bellow.
AIM-SPICE Tutorial.
Description:-
This tutorial will provide explanations helpful in using the simulator for defining circuit designs, generating circuit netlists, running the simulation and displaying the output of the simulation. Appropriate examples are also included to help users understand simulation techniques.
Computer Aids for VLSI Design
The Characteristics of Digital Electronic Design, Design Environments, Output of Design Aids, Programmability.
- For more details and to download visit their webpage "Computer Aids for VLSI Design"
Refrigeration and air conditioning
File Size :- 5.63 MB
File Type:-Pdf
Pages:-161
Contents:-
Lesson 1
Chapter
1 Direct Expansion Systems
2 Absorption Systems
Lesson 2
Chapter
3 Centrifugal Systems
4 Water Treatment
Lesson 3
Chapter
5 Centrifugal Water Pumps
6 Fundamentals of Electronic Controls
7 Electronic Control Systems
Answers to Review Exercises
NEETS (Navy Electricity and Electronics Training Series)
24 Modules :
*
Module 1(Download), Introduction to Matter, Energy, and Direct Current, introduces the course with a short history of electricity and electronics and proceeds into the characteristics of matter, energy, and direct current(dc). It also describes some of the general safety precautions and first-aid procedures that should be common knowledge for a person working in the field of electricity. Related safety hints are located throughout the rest of the series, as well.
*
Module 2
(Download), Introduction to Alternating Current and Transformers, is an introduction to alternating current (ac) and transformers, including basic ac theory and fundamentals of electromagnetism, inductance, capacitance, impedance, and transformers.
*
Module 3(Download), Introduction to Circuit Protection, Control, and Measurement, encompasses circuit breakers, fuses, and current limiters used in circuit protection, as well as the theory and use of meters as electrical measuring devices.
*
Module 4
(Download), Introduction to Electrical Conductors, Wiring Techniques, and Schematic Reading, presents conductor usage, insulation used as wire covering, splicing, termination of wiring, soldering, and reading electrical wiring diagrams.
*
Module 5(Download), Introduction to Generators and Motors, is an introduction to generators and motors, and covers the uses of ac and dc generators and motors in the conversion of electrical and mechanical energies.
*
Module 6(Download), Introduction to Electronic Emission, Tubes, and Power Supplies, ties the first five modules together in an introduction to vacuum tubes and vacuum-tube power supplies.
*
Module 7(Download), Introduction to Solid-State Devices and Power Supplies, is similar to module 6, but it is in reference to solid-state devices.
*
Module 8(Download), Introduction to Amplifiers, covers amplifiers.
*
Module 9(Download), Introduction to Wave-Generation and Wave-Shaping Circuits, discusses wave generation and wave-shaping circuits.
*
Module 10(Download), Introduction to Wave Propagation, Transmission Lines, and Antennas, presents the characteristics of wave propagation, transmission lines, and antennas.
*
Module 11(Download), Microwave Principles, explains microwave oscillators, amplifiers, and waveguides.
*
Module 12(Download), Modulation Principles, discusses the principles of modulation.
*
Module 13
(Download), Introduction to Number Systems and Logic Circuits, presents the fundamental concepts of number systems, Boolean algebra, and logic circuits, all of which pertain to digital computers.
*
Module 14
(Download), Introduction to Microelectronics, covers microelectronics technology and miniature and microminiature circuit repair.
*
Module 15(Download), Principles of Synchros, Servos, and Gyros, provides the basic principles, operations, functions, and applications of synchro, servo, and gyro mechanisms.
*
Module 16
(Download), Introduction to Test Equipment, is an introduction to some of the more commonly used test equipments and their applications.
*
Module 17(Download), Radio-Frequency Communications Principles, presents the fundamentals of a radiofrequency communications system.
*
Module 18
(Download), Radar Principles, covers the fundamentals of a radar system.
*
Module 19
(Download), The Technician's Handbook, is a handy reference of commonly used general information, such as electrical and electronic formulas, color coding, and naval supply system data.
*
Module 20
(Download), Master Glossary, is the glossary of terms for the series.
Module 21
(Download), Test Methods and Practices, describes basic test methods and practices.
*
Module 22
(Download), Introduction to Digital Computers, is an introduction to digital computers.
*
Module 23(Download), Magnetic Recording, is an introduction to the use and maintenance of magnetic recorders and the concepts of recording on magnetic tape and disks.
*
Module 24
(Download), Introduction to Fiber Optics, is an introduction to fiber optics.
NOTE : TRY USING FOXIT READER (FREE) IF YOU GOT A PROBLEM WHEN OPENING NEETS FILES. FIND THE SOFTWARE BY GOOGLING.
div align="center">
*
Module 1(Download), Introduction to Matter, Energy, and Direct Current, introduces the course with a short history of electricity and electronics and proceeds into the characteristics of matter, energy, and direct current(dc). It also describes some of the general safety precautions and first-aid procedures that should be common knowledge for a person working in the field of electricity. Related safety hints are located throughout the rest of the series, as well.
*
Module 2
(Download), Introduction to Alternating Current and Transformers, is an introduction to alternating current (ac) and transformers, including basic ac theory and fundamentals of electromagnetism, inductance, capacitance, impedance, and transformers.
*
Module 3(Download), Introduction to Circuit Protection, Control, and Measurement, encompasses circuit breakers, fuses, and current limiters used in circuit protection, as well as the theory and use of meters as electrical measuring devices.
*
Module 4
(Download), Introduction to Electrical Conductors, Wiring Techniques, and Schematic Reading, presents conductor usage, insulation used as wire covering, splicing, termination of wiring, soldering, and reading electrical wiring diagrams.
*
Module 5(Download), Introduction to Generators and Motors, is an introduction to generators and motors, and covers the uses of ac and dc generators and motors in the conversion of electrical and mechanical energies.
*
Module 6(Download), Introduction to Electronic Emission, Tubes, and Power Supplies, ties the first five modules together in an introduction to vacuum tubes and vacuum-tube power supplies.
*
Module 7(Download), Introduction to Solid-State Devices and Power Supplies, is similar to module 6, but it is in reference to solid-state devices.
*
Module 8(Download), Introduction to Amplifiers, covers amplifiers.
*
Module 9(Download), Introduction to Wave-Generation and Wave-Shaping Circuits, discusses wave generation and wave-shaping circuits.
*
Module 10(Download), Introduction to Wave Propagation, Transmission Lines, and Antennas, presents the characteristics of wave propagation, transmission lines, and antennas.
*
Module 11(Download), Microwave Principles, explains microwave oscillators, amplifiers, and waveguides.
*
Module 12(Download), Modulation Principles, discusses the principles of modulation.
*
Module 13
(Download), Introduction to Number Systems and Logic Circuits, presents the fundamental concepts of number systems, Boolean algebra, and logic circuits, all of which pertain to digital computers.
*
Module 14
(Download), Introduction to Microelectronics, covers microelectronics technology and miniature and microminiature circuit repair.
*
Module 15(Download), Principles of Synchros, Servos, and Gyros, provides the basic principles, operations, functions, and applications of synchro, servo, and gyro mechanisms.
*
Module 16
(Download), Introduction to Test Equipment, is an introduction to some of the more commonly used test equipments and their applications.
*
Module 17(Download), Radio-Frequency Communications Principles, presents the fundamentals of a radiofrequency communications system.
*
Module 18
(Download), Radar Principles, covers the fundamentals of a radar system.
*
Module 19
(Download), The Technician's Handbook, is a handy reference of commonly used general information, such as electrical and electronic formulas, color coding, and naval supply system data.
*
Module 20
(Download), Master Glossary, is the glossary of terms for the series.
Module 21
(Download), Test Methods and Practices, describes basic test methods and practices.
*
Module 22
(Download), Introduction to Digital Computers, is an introduction to digital computers.
*
Module 23(Download), Magnetic Recording, is an introduction to the use and maintenance of magnetic recorders and the concepts of recording on magnetic tape and disks.
*
Module 24
(Download), Introduction to Fiber Optics, is an introduction to fiber optics.
NOTE : TRY USING FOXIT READER (FREE) IF YOU GOT A PROBLEM WHEN OPENING NEETS FILES. FIND THE SOFTWARE BY GOOGLING.
div align="center">
Transformers
This is a book which's helpful for engineering students. it can be downloaded in zip format in the direct link given bellow.
Download
Download
