Warm Welcome

::::::::::::::::Praise The Lord:::::::::::::::::

Get Everything On Amazon !

Showing posts with label Power supply. Show all posts
Showing posts with label Power supply. Show all posts

UPS selection, installation and maintenance

TABLE OF CONTENS


CHAPTER 1 INTRODUCTION


Purpose


Scope References


Principles and configurations


Design criteria and selection


Installation and testing


Maintenance

CHAPTER 2 PRINCIPLES AND CONFIGURATIONS OF UNINTERRUPTIBLE


POWER SUPPLY (UPS) SYSTEMS


Principles of static UPS systems


Principles of rotary UPS systems


Common static UPS system configurations


Rotary UPS system configurations


CHAPTER 3 DESIGN AND SELECTION OF UNINTERRUPTIBLE POWER


SUPPLY (UPS)


Selecting an UPS


Static UPS system ratings and size selection


Rotary UPS system ratings and size selection


CHAPTER 4 INSTALLATION AND TESTING OF UNINTERRUPTIBLE


POWER SUPPLY (UPS)


Construction and installation of static UPS systems


Construction and installation of rotary UPS systems


Power distribution and equipment grounding and shielding requirements


Testing and start-up


Test equipment


CHAPTER 5 UNINTERRUPTIBLE POWER SUPPLY (UPS) SYSTEMS


MAINTENANCE PROCEDURES


Maintenance for UPS systems


UPS battery maintenance


APPENDIX A REFERENCES


APPENDIX B SELECTING AN UNINTERRUPTIBLE POWER SUPPLY (UPS):


AN EXAMPLE




Power Transformer Maintenance and Acceptance Testing

File Size: 3.7 MB


Pages:-62


File Type :- Pdf



TABLE OF CONTENTS



  • INTRODUCTION / SAFETY

  • Purpose

  • scope

  • References

  • Maintenance and tesdng

  • safety

  • Nameplatedata

  • CONSTRUCTIONlTHEORY


    Transfomer applications


    Magnetic flux


    Winding,current and voltage ratios


    Core construction


    Core form construction


    Shell form construction


    TRANSFORMER CONNECTIONS AND TAPS


    Tapped Primaries and secondaries


    Polarity


    Autotransfomers


    Single and multi-phase relationships


    Delta-wye and wye-delta displacements

  • COOLING CONSTRUCTION CLASSIFlCATIONS


    Classifications


    Dry-type transfomers


    Liquid-filled transformers


    Tank construction


    Free breathing tanks


    Consevator tank


    Gas-oil sealed tank


    Automatic inet gas sealed tanks


    Sealed tank type

  • INSULATING FLUIDS


    Oil


    Oil testing


    Dissolved gas in oil analysis


    Transformer oil sampling


    Synthetics and other insulating fluids

  • INITIAL ACCEPTANCE INSPECTION TESTING


    Acceptance


    Pre arrival preparations


    Receiving and inspection


    Moving and storage


    Internal inspection


    Testing for leaks


    Vacuum filling

  • TRANSFORMER TESTING


    Test data


    Direc tcurrent testing


    Alternating current testing

  • TRANSFORMER AUXILIARY EQUIPMENT


    Auxiliaries


    Bushings


    Pressure relief devices


    Pressure gauges


    Temperature gauges


    Tap changers


    Lightning (surge) arresters

  • COMPREHENSIVE MAlNTENANC / TESTING PROGRAM


    Transformer maintenance


    Maintenance and testing program


    Documentation


    Scheduling

  • STATUS OF TRANSFORMER MONITORING AND DIAGNOSTICS


    Introduction


    Transformer Monitoring


    Transformer diagnostics


    Conclusions


    REFERENCES

Interior Electrical Systems

File Size:- 1.78 MB


Pages:- 279 pages




Contents:-



  • 1. General

  • 1-1 PURPOSE


    1-2 SCOPE


    1-3 REFERENCES


    1-4 CODES AND STANDARDS


    1-5 SYMBOLS


    1-6 APPLICABILITY


    1-7 MANUAL CONTENT AND ORGANIZATION

  • PRELIMINARY AND DETAILED DESIGN ANALYSIS


    2-1 PRELIMINARY DESIGN


    2-1.1 Principal Points of Contact


    2-1.2 Preliminary Design Guidance for Interior Electrical Systems


    2-1.3 Unified Facilities Guide Specifications


    2-2 ELECTRICAL LOAD CRITERIA


    2-3 OVERVIEW OF DETAILED ANALYSIS CRITERIA


    2-4 SHORT CIRCUIT ANALYSIS


    2-4.1 Analysis and Equipment Criteria


    2-4.2 Short Circuit Sources


    2-4.3 Symmetrical Versus Asymmetrical Current


    2-4.4 Short Circuit Calculations


    2-5 POWER FLOW ANALYSIS


    2-6 VOLTAGE DROP ANALYSIS


    2-6.1 Voltage Drop Calculations


    2-6.2 Motor Starting Studies


    2-7 ELECTRICAL COORDINATION


    2-8 POWER QUALITY AND HARMONIC DISTORTION


    2-9 LIGHTING


    2-10 ENERGY ANALYSIS


    2-10.1 Overview


    2-10.2 New Facility Criteria


    2-10.3 Existing Facilities


    2-10.4 Energy Efficiency Design Opportunities in the Electrical System


    2-11 LIFE-CYCLE COST ANALYSIS


    2-12 ELECTRICAL DRAWINGS


    2-12.1 Introduction


    2-12.2 One-Line Diagrams


    2-12.3 Switchgear Lineups


    2-12.4 MCC Layouts


    2-12.5 Grounding


    2-12.6 Control Panel Wiring Diagrams


    2-12.7 Control Schematics


    2-12.8 Miscellaneous Interconnection Diagrams


    2-12.9 Equipment Layouts with Conduit or Cable Tray


    2-12.10 Panel Schedules


    2-12.11 Lighting and Receptacle Layouts


    2-12.12 Motor List


    2-12.13 Conduit or Cable Schedule

  • GENERAL POWER SYSTEM CRITERIA


    3-1 CHARACTERISTICS


    3-1.1 Voltage


    3-1.2 Frequency


    3-1.3 Power Factor


    3-1.4 Neutral Conductor Grounding


    3-2 NORMAL POWER SOURCE


    3-3 ALTERNATE AND BACKUP POWER SOURCE


    3-4 SERVICES

  • POWER DISTRIBUTION AND UTILIZATION-TRANSFORMERS


    4-1 RATINGS


    4-1.1 Introduction


    4-1.2 Voltage and Current


    4-1.3 Temperature and kVA


    4-1.4 Impedance


    4-1.5 Number of Phases


    4-1.6 Transformer Taps


    4-1.7 Noise


    4-1.8 Basic Impulse Insulation Levels (BILs)


    4-2 LOW VOLTAGE TRANSFORMERS


    4-3 MEDIUM VOLTAGE TRANSFORMERS


    4-4 OTHER TRANSFORMERS


    4-4.1 Isolation Transformers


    4-4.2 Buck-Boost Transformers


    4-4.3 K-Factor Transformers


    4-4.4 Specialty Transformers


    4-5 TRANSFORMER INSTALLATION CRITERIA


    4-5.1 Introduction


    4-5.2 Dry-Type Transformers


    4-5.3 Less-Flammable, Liquid-Insulated, and Oil-Insulated Transformers


    4-5.4 Fire Protection Criteria


    4-6 TRANSFORMER SIZING


    4-7 INFORMATION SOURCES

  • CHAPTER 5 POWER DISTRIBUTION AND UTILIZATION-SWITCHGEAR, LOAD CENTERS, AND BREAKERS

  • 5-1 SERVICE ENTRANCE


    5-2 SWITCHGEAR AND SWITCHBOARDS GENERAL CRITERIA


    5-3 HIGH VOLTAGE SWITCHGEAR


    5-4 MEDIUM VOLTAGE SWITCHGEAR


    5-4.1 Ratings


    5-4.2 Low Voltage Conductors in Medium Voltage Switchgear


    5-5 LOW VOLTAGE BREAKERS AND PANELS


    5-6 MOTOR CONTROL CENTERS


    5-7 DISCONNECT SWITCHES


    5-8 CIRCUIT LOCKOUT REQUIREMENTS


    5-9 INFORMATION SOURCES

  • CHAPTER 6 POWER DISTRIBUTION AND UTILIZATION-RACEWAY AND WIRING

  • 6-1 RACEWAY CRITERIA


    6-2 WIRING SYSTEM CRITERIA


    6-3 SIZING WIRING SYSTEMS FOR ENERGY SAVINGS


    6-4 CONVENIENCE OUTLETS AND RECEPTACLES


    6-5 WIRING FOR TEMPORARY POWER AND LIGHTING


    6-6 ACCEPTANCE TESTING OF WIRING SYSTEMS

  • CHAPTER 7 POWER DISTRIBUTION AND UTILIZATION-MOTORS AND MOTOR CONTROL CIRCUITS

  • 7-1 BASIC MOTOR CRITERIA


    7-2 MOTOR CONTROL CIRCUITS


    7-3 ADJUSTABLE SPEED DRIVES

  • CHAPTER 8 POWER DISTRIBUTION AND UTILIZATION-OTHER DESIGN CRITERIA

  • 8-1 ELECTRICAL EQUIPMENT CLEARANCES AND GUARDS


    8-1.1 Background


    8-1.2 Equipment Rated 600 Volts and Lower


    8-1.3 Equipment Rated Above 600 Volts


    8-2 ENCLOSURES


    8-3 HAZARDOUS LOCATIONS


    8-4 400-HERTZ DISTRIBUTION SYSTEMS


    8-5 METERING


    8-6 POWER FACTOR CORRECTION

  • CHAPTER 9 ELECTRICAL SYSTEM PROTECTION AND COORDINATION

  • 9-1 PROTECTION SYSTEM DESIGN


    9-2 ELECTRICAL COORDINATION ANALYSIS CRITERIA


    9-2.1 Introduction


    9-2.2 Coordination Study Description


    9-2.3 Coordination Time Intervals


    9-2.4 Pickup Current


    9-2.5 Coordination Curves


    9-2.6 Coordination Analysis


    9-2.7 Coordination Study Report


    9-3 PROTECTIVE RELAYS


    9-4 INSTRUMENT TRANSFORMERS


    9-4.1 Background


    9-4.2 Current Transformers


    9-4.3 Potential Transformers


    9-5 FUSES


    9-6 OVERLOAD RELAYS


    9-7 CIRCUIT BREAKERS


    9-8 PROTECTIVE DEVICE DESIGNATIONS


    9-9 INFORMATION SOURCES

  • CHAPTER 10 GROUNDING, BONDING, AND LIGHTNING PROTECTION

  • 10-1 INTRODUCTION


    10-2 NEC GROUNDING AND BONDING REQUIREMENTS


    10-3 STATIC PROTECTION


    10-4 COMMUNICATIONS SYSTEMS GROUNDING AND BONDING


    10-4.1 Introduction


    10-4.2 Connection to the Grounding Electrode


    10-4.3 Commercial Building Grounding and Bonding Requirements for Telecommunications


    10-5 LIGHTNING PROTECTION


    10-6 INFORMATION SOURCES

  • CHAPTER 11 SURGE PROTECTION

  • 11-1 INTRODUCTION


    11-2 SURGE PROTECTION DESIGN


    11-2.1 Parallel Versus Series Approach


    11-2.2 Multiple Layer Protection Design


    11-3 INSTALLATION CRITERIA


    11-3.1 Minimizing Lead Length for Parallel Surge Protectors


    11-3.2 Breaker Connection


    11-3.3 Grounding


    11-3.4 Acceptance Tests


    11-3.5 Periodic Maintenance


    11-4 SURGE PROTECTION FOR COMMUNICATIONS AND RELATED SYSTEMS

  • CHAPTER 12 POWER SYSTEM QUALITY

  • 12-1 INTRODUCTION


    12-2 UNBALANCED VOLTAGES


    12-3 HARMONIC DISTORTION EVALUATION


    12-4 HARMONIC CURRENT EFFECTS ON TRANSFORMERS


    12-5 POWER QUALITY DESIGN


    12-6 NONLINEAR LOAD DESIGN CONSIDERATIONS


    12-7 NEUTRAL CIRCUIT SIZING FOR NONLINEAR LOADS


    12-7.1 Potential Neutral Current Magnitudes


    12-7.2 Installation Design Criteria


    12-8 INFORMATION SOURCES

  • CHAPTER 13 EMERGENCY AND STANDBY POWER SYSTEMS

  • 13-1 ESTABLISHING THE NEED FOR BACKUP POWER


    13-2 CLASSIFYING EMERGENCY POWER LOADS


    13-3 ENGINE GENERATORS


    13-4 UPS SYSTEMS


    13-4.1 Introduction


    13-4.2 Selection and Performance


    13-4.3 Sizing


    13-4.4 Selection of a Large UPS System or Multiple Smaller UPS Systems

  • 13-4.5 Design Criteria


    13-4.6 Site Survey for an Installation


    13-5 AUTOMATIC TRANSFER EQUIPMENT


    13-5.1 Introduction


    13-5.2 Transfer Methods


    13-5.3 Design Considerations


    13-5.4 Static Transfer Switches


    13-5.5 Sizing


    13-5.6 Effect of Motor Loads


    13-5.7 Maintaining Ground Fault Protection


    13-5.8 Additional System Design Considerations


    13-5.9 Information Sources

  • CHAPTER 14 STATIONARY BATTERY SYSTEMS

  • 14-1 STATIONARY BATTERIES


    14-1.1 Selection


    14-1.2 Battery Areas and Battery Racks


    14-1.3 Installation Design Considerations


    14-2 BATTERY CHARGERS


    14-3 BATTERY PROTECTION

  • CHAPTER 15 LIGHTING

  • 15-1 LIGHTING DESIGN CRITERIA

  • CHAPTER 16 COMMUNICATIONS AND INFORMATION SYSTEMS

  • 16-1 INTRODUCTION


    16-2 ARMY DESIGN CRITERIA


    16-3 NAVY DESIGN CRITERIA


    16-4 AIR FORCE DESIGN CRITERIA

  • CHAPTER 17 AUXILIARY SYSTEMS

  • 17-1 FIRE ALARM AND DETECTION SYSTEMS


    17-2 SECURITY SYSTEMS


    17-3 TELEVISION SYSTEMS


    17-4 CLOCK SYSTEMS


    17-5 ENERGY MANAGEMENT AND CONTROL SYSTEMS

  • CHAPTER 18 FACILITY-SPECIFIC DESIGN CRITERIA

  • 18-1 MEDICAL FACILITIES


    18-2 POWER DISTRIBUTION FOR AIRCRAFT HANGARS (SHELTERS)


    18-3 HIGH-ALTITUDE ELECTROMAGNETIC PULSE (HEMP) AND TEMPEST PROTECTION


    18-4 SEISMICALLY QUALIFIED DESIGNS


    18-5 TROPICAL ENGINEERING


    18-6 ARCTIC ENGINEERING


    18-7 GENERAL FACILITY TYPES

Electrical Power Supply and Distribution

File Size:- 1.6 MB


Pages:- 125 pages




Contents:-



  • 1. GENERAL


    Purpose


    Scope


    References


    Standards and Codes


    Power Supply Design Criteria


    Electrical Power Sytems


    Design Procedures


    Evaluation and Selection of Energy Systems


    Design Analysis


    Service Conditions


    Explanation of Abbreviations and Terms

  • 2. ELECTRICAL POWER REQUIREMENTS


    General


    Load Estimation

  • 3. VOLTAGE SELECTION


    General


    System Voltage Classifications


    Selection of Primary Distribution Voltage for New Installations


    Selection of Primary Distribution Voltage for Existing Installations


    Commercial Power for Air Force Installations


    Selection of Primary Distribution Voltage for Air Force Installations

  • 4. MAIN ELECTRIC SUPPLY STATIONS/SUBSTATIONS


    Provisions


    Ownership


    Station Designation and Elements


    Main Electric Supply Station/Substation


    Environmental Aspects


    Incoming Line Switching Equipment


    Substation Equipment


    Miscellaneous Station Design Criteria


    Substation Equipment at Air Force Installations

  • 5. ELECTRIC DISTRIBUTION LINES


    Selection


    Types of Underground Lines


    Types of Aerial Lines


    Voltage Drop


    Power Factor Correction


    Medium-Voltage Circuits


    Pad-Mounted Line Sectionalizing Equipment


    Joint Electrical/Communication Lines for Air Force Installation


    6. AERIAL DISTRIBUTION LINES


    General


    Installation Considerations


    Conductors


    Poles


    Circuit Configurations


    Insulators


    Guying


    Miscellaneous Items


    Air Force Installations

  • 7. UNDERGROUND DISTRIBUTION LINES


    General


    Cable


    Duct Lines


    Manholes, Handholes, and Pullboxes


    Direct-Burial Cable Installations

  • 8. TRANSFORMER INSTALLATIONS


    Definitions


    Installation of Distribution-to-Utilization Voltage Transformers


    Installation of Transmission-to-Distribution Voltage Transformers


    Transformer Dielectrics


    Transformer Characteristics


    Amorphous Metal-Core Transformers


    Transformers at Air Force Installations

  • 9. SURGE PROTECTION AND GROUNDING


    Voltage Surges and Potential Gradients


    Methods of Controlling Voltage Surges and Potential Gradients


    Ground Electrodes


    Grounding Details and Requirements

  • 10. ROADWAY AND AREA LIGHTING


    General


    Roadway Lighting Design


    Area Lighting Design


    Walkway and Bikeway Lighting Design


    Light Sources


    Lighting Control and Wiring System

  • 11. SECURITY LIGHTING


    General


    Authorization


    Use of Security Lighting Systems


    Types of Areas to be Lighted


    Lighting Guidelines


    Light Sources


    Electrical Power Sources


    Luminaries


    Wiring and Control


    Field Measurement

Electrical Exterior Facilities

File Type : PDF


File Size : 3.34 MB


Pages : 201


Contents:-








  • CHAPTER 1. INTRODUCTION

  • I-PRIMARY CONSIDERATIONS


    II-SAFETY


    III-AVOIDING PROBLEMS

  • CHAPTERS 2. INSPECTION AND TESTS

  • I-PERFORMANCE


    II-REQUIREMENTS

  • CHAPTER 3. TRANSMISSION AND DISTRIBUTION SUBSTATIONS

  • I-GOVERNING CONSIDERATIONS


    II-STRUCTURE MAINTENANCE


    III-SUBSTATION YARDS


    IV-INSULATORS


    V-BUS STRUCTURES


    VI-INSTRUMENT TRANSFORMERS


    VII-BUSHINGS

  • CHAPTER 4. OVERHEAD DISTRIBUTION

  • I-ASSOCIATED OVERHEAD DISTRIBUTION GUIDANCE


    II-DEFINING VOLTAGE NOMENCLATURE


    III-TYPES OF MAINTENANCE


    IV-WOOD POLES


    V-CROSSARMS, BRACES, AND PLATFORMS


    VI-MAINTENANCE WOOD PRESERVATION


    VII-METAL POLES


    VIII-CONCRETE POLES


    IX-OVERHEAD OPEN WIRE CONDUCTORS


    X-OVERHEAD CABLE


    XI-CONDUCTOR CONNECTIONS


    XII-POLE-LINE INSULATORS


    XIII-GUYS


    XIV-TREE TRIMMING


    XV-LIVE-LINE MAINTENANCE


    XVI-AERIAL LIFT REQUIREMENTS


    Aerial lift construction


    Aerial lift specificss

  • CHAPTER 5. UNDERGROUND AND SUBMARINE CABLES


    I-ASSOCIATED GUIDANCE


    II-SAFETY PRECAUTIONS


    III-INSPECTION


    IV-MAINTENANCE AND REPAIR OF DUCT SYSTEMS


    V-CABLE FAULTS AND FAULT LOCATIONS


    VI-CABLE REPAIR


    VII-CABLE TESTING


    IX-UNDERGROUND CORROSION CONTROL

  • CHAPTER 6. OUTDOOR LIGHTING

  • I-LIGHTING AND CIRCUIT TYPES


    II-MULTIPLE TYPE LIGHTING


    III-LIGHT DISTRIBUTION


    IV-SERIES TYPE AIRFIELD LIGHTING

  • CHAPTER 7. TRANSFORMERS AND REGULATORS

  • I-CONSIDERATIONS


    II-MAINTENANCE

  • CHAPTER 8. OVER CURRENT PROTECTIVE AND SWITCHING DEVICES

  • I-CONSIDERATIONS


    II-FUSES


    III-SWITCHES


    IV-CIRCUIT BREAKERS


    V-MISCELLANEOUS DEVICES

  • CHAPTER 9. OVERVOLTAGE PROTECTION

  • I-CONSIDERATIONS


    II-SURGE (LIGHTNING) ARRESTERS


    III-OTHER DEVICES

  • CHAPTER 10. GROUNDING

  • I-CONSIDERATIONS


    II-MAINTENANCE


    III-TESTING

  • CHAPTER 11. RELAYS AND CONTROLS


    I-RELAYS, ELECTRIC POWER APPARATUS


    II-CONTROLS

  • CHAPTER 12. INSTRUMENTS AND METERS

  • I-CONSIDERATIONS


    II-PREVENTIVE MAINTENANCE


    III-CALIBRATION AND ADJUSTMENT


    IV-REPAIRS


    V-TROUBLESHOOTING

  • CHAPTER 13. POWER CAPACITORS

  • I-CONSIDERATIONS


    II-MAINTENANCE AND INSPECTION


    III-TESTS

  • CHAPTER 14. STORAGE BATTERIES

  • I-CONSIDERATIONS


    II-FLOODED LEAD-ACID BATTERY MAINTENANCE


    III-FLOODED LEAD-ACID BATTERY CHARGING


    IV-VALVE-REGULATED LEAD-ACID CELL BATTERIES


    V-Nickel-cadmium cell batteries


    VI-CHECKS AND TROUBLESHOOTING


    VII-BATTERY CHARGING EQUIPMENT


    VIII-PLACING A NEW BATTERY IN SERVICE


    IX-PUTTING A BATTERY IN STORAGE


    X-REPLACEMENT AND DISPOSAL

  • CHAPTER 15. TOOLS AND EQUIPMENT

  • I-USE


    II-HAZARDOUS MATERIAL PROCEDURES


    III-PROTECTIVE EQUIPMENT


    IV-CLIMBING EQUIPMENT


    V-LIVE-LINE TOOLS


    VI-HAND TOOLS


    VII-ROPE


    VIII-LARGE PORTABLE AND MOBILE EQUIPMENT


    IX-ELECTRICAL INSPECTING AND TESTING EQUIPMENT

  • CHAPTER 16. ELECTRICAL SERVICE INTERFERENCE


    I-DISTURBANCE PRODUCERS


    II-ELECTROMAGNETIC INTERFERENCE


    III-HARMONIC INTERFERENCE

  • CHAPTER 17. MAINTENANCE SCHEDULES


    I-CONSIDERATIONS


    II-SCHEDULES

Power Systems

This is a book which's helpful for engineering students. it can be downloaded in zip format in the direct link given bellow.

Personal Protective Grounding for Electric Power Facilities and Power Lines

File Size : 1.66 MB


Pages: 89




Contents:-





  • 1. Purpose and Scope


    1.1 Purpose


    1.2 Scope


    1.3 Responsibility


    1.4 Cancellation



  • 2. Definitions and Interpretations



  • 3. Determine Need for Personal Protective Grounding


    3.1 Uses Permitted


    3.1.1 Over 600 Volts (Required)


    3.1.2 Less Than 600 Volts (Optional)


    3.2 Uses Not Permitted


    3.2.1 Lightning


    3.2.2 Over 50,000 Amperes Available Fault Current


    3.2.3 Nontemporary Installations

  • 4. Basic Criteria for Safe Grounding Practices


    4.1 Electric Shock Hazard


    4.2 Protective Grounding Requirements



  • 5. Ground Cable Assemblies


    5.1 Grounding Cable


    5.1.1 Cable Ampacity


    5.1.2 Parallel Grounds


    5.2 Grounding Cable Jackets


    5.3 Grounding Clamps


    5.4 Ground Cable Ferrules



  • 6. Application of Protective Ground Cables


    6.1 Determine Maximum Available Fault Current at Worksite


    6.2 Size the Cables


    6.2.1 Cable Size


    6.2.2 Cable Length


    6.3 Inspect Ground Cable Assemblies


    6.4 Obtain a Clearance


    6.5 Confirm De-Energized Status (arc flash hazard analysis required)


    6.5.1 Hot Stick


    6.5.2 Noisy Tester


    6.5.3 Hot Horn or Noisy Tester


    6.5.4 Multiple Range Voltage Detector


    6.5.5 Neon-Type Indicator


    6.5.6 Direct-Reading Voltmeter


    6.6 Clean Connections (arc flash hazard analysis required)


    6.6.1 Wire Brushing


    6.6.2 Self-Cleaning Clamps


    6.7 Grounding Cable Installation


    6.7.1 Ground-End Clamps


    6.7.2 Circuit-End Clamps (arc flash hazard analysis required)


    6.7.3 Multiphase, Worksite Grounding Required


    6.7.4 Parallel Grounds


    6.7.5 Barricade


    6.7.6 Removal


    6.8 Arc Flash Hazard Analysis Required



  • 7. Power and Pumping Plant Protective Grounding


    7.1 Three-Phase Tee Grounding


    7.2 Double-Isolation Grounding



  • 8. Switchyard and Substation Protective Grounding


    8.1 General Considerations for Placement of Protective Grounds


    8.2 Power Circuit Breakers and Transformers


    8.3 Disconnect Switches and Bus


    8.4 Insulated High-Voltage Cable


    8.4.1 Cable Terminations


    8.4.2 Midsection and Splices


    8.4.3 Cable Testing


    8.5 Grounding Transformers and Phase Reactors


    8.6 Capacitor Banks


    8.7 Mobile Equipment



  • 9. Power Line Protective Grounding


    9.1 Grounding on Metal Transmission Structures


    9.2 Grounding on Wood Pole Transmission Structures


    9.3 Transmission Line Terminal Ground Switches


    9.4 Grounding on Distribution Lines


    9.5 Surface Equipment and Vehicle Grounding


    9.6 Opening or Splicing Aerial Conductors


    9.7 Grounding Insulated Power Cable



  • 10. Care, Inspection, and Testing Protective Grounding Equipment


    10.1 Care


    10.2 Inspection


    10.2.1 Ground Cable Assemblies


    10.2.2 Live-Line Tools


    10.3 Testing


    10.3.1 Ground Cable Assemblies


    10.3.2 Live-Line Tools


    10.4 Records


Inside Catalogs

Twitter Delicious Facebook Digg Stumbleupon Favorites More

 
Design by Tej Enosh | Maintained by Teja labs San Fsc.inc - We Like Thums Up | And Coca-Cola